CNC WHEEL
Brief introduction: CNC Profiling wheel are equipped on the CNC stone processing machine. Precise profiling, high effecieny, it is widely used in the edge processing of vanity top and counter-top etc.
1) Applicable for special shape stone processing.
2) Diameter 120mm- Bore 35mm (smaller diameters available on demand).
3) Thickness of processed stone 20-60mm.
*For other specification and sizes are availble upon request.
Brief introduction: CNC Profiling wheel are equipped on the CNC stone processing machine. Precise profiling, high effecieny, it is widely used in the edge processing of vanity top and counter-top etc.
1) Applicable for special shape stone processing.
2) Diameter 120mm- Bore 35mm (smaller diameters available on demand).
3) Thickness of processed stone 20-60mm.
*For other specification and sizes are availble upon request.
| Position | Type of Working Layer | Grit | Working Procedure | |||
| Pos. 0 | Metal Sintered, Segmented | 30,40 | Roughing | |||
| Pos. 1 | Metal Sintered, Segmented | 30,40 | Shaping | |||
| Pos. 2 | Metal sintered, Continous | 70,80 | Coarse profiling | |||
| Pos. 3 | Metal sintered, Continous | 140,170 | Medium finishing | |||
| Pos. 4 | Metal sintered, Continous | 230,270 | Finishing | |||
| Pos. 5 | ABR hot pressed, Continous | 400 | Good finishing | |||
| Pos. 6 | ABR hot pressed, Continous | 800 | Polishing | |||
| Pos. 7 | ABR hot pressed, Continous | 1500 | Polishing and Buff | |||
| Pos. 8 | ABR hot pressed, Continous | 3000 | Polishing and Buff | |||