Real Homes

2023-02-27 10:32:31 By : Ms. Fandy Lee

When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.

How to cut tiles with or without a wet saw for a clean finish – whether you're cutting glass, porcelain or mosaic tiles for your next DIY kitchen or bathroom project.

Thank you for signing up to Realhomes. You will receive a verification email shortly.

There was a problem. Please refresh the page and try again.

Wondering how to cut tiles, or where to start with a DIY tile job? When you're tiling a floor, a wall or even a kitchen backsplash, it's likely that you'll have some awkward gaps to fill along the way – mainly when you get to the edges. 

If you're a seasoned DIYer, this won't faze you and you'll have your wet saw out ready and waiting to cut tiles to the size you need. However, if you're new at this and have no idea where to start using tools, or if you actually want to avoid using wet saws and other electric tools at all when cutting tiles – rest assured, you can still learn how to cut tiles without a tile cutter too.

The best kitchen tiles can be pricier than your bog standard basic porcelain plates and ceramic slates. So the last thing you want to do is perform a sub-standard job when you're dealing with premium products. So we'll show you how to dress your scheme, so that you can reclaim your cooking space but in an instant.

And, no one wants an out of order restroom either, so by doing the job yourself (rather than hiring a laborer), it means that you can have your comfort breaks without inconveniencing the employed help. 

So from subway tiles in running bond layouts to less forgiving Herringbone and Chevron arrangements, we lay down the foundations for scoring tiles successfully.

Buy these Ca' Pietra unicorn tiles from Hyperion tiles

Philip Ash, founder of Pro Paint Corner (opens in new tab) says, 'You can most definitely cut all types of tiles yourself, it's just about having the correct tools for the job, trusting yourself to be safe with sharp machinery, and being detail-oriented to ensure you cut them correctly.'

A manual cutter is used for straight cuts, they take longer to use than power tools but they are a cheaper alternative and simpler to use if you're just starting out and learning how to tile a wall or just replacing a few damaged tiles. They have a handle which runs on a rail, allowing you to make a smooth cut, much like with a paper guillotine.

As well as the horizontal rail variant, you can find cutters that work like those you may have seen at high school) where one blade is pushed down from above.

Mosaics seem like the scariest of all tile patterns to tackle as they are dainty and beautiful looking however, no matter whether your are plain or fancy, you should be able to get a good clean cut on smaller tiles using a manual cutter also. No wet saw in sight.

They're a great idea for a kitchen backsplash to add color, and the more abstract designs can hide saucy stains and mask marks on your wall. So if you want to start on this small area, we've got a 10-step tutorial on how to tile a backsplash (opens in new tab) .

Some designs (like Ca' Pietra's Mono Hex Porcelain Daisy (opens in new tab) pictured above) can save you lots of time (and your sanity) by creating a mosaic-like look without chopping up individual hexagonal shapes.

The same dirt-disguising benefits apply to kitchen floor tile ideas, so if you want to give it this more advanced job a go (once you've built a bit of DIY confidence up) – we can break down how to tile a floor step-by-step too.

These Marlborough Terracotta Parquet tiles by Ca' Pietra (opens in new tab) can help add a classic touch to a contemporary kitchen with modern kitchen ideas. A really versatile tile that'll blur old and new styles wonderfully when accessorized alongside Terracotta planters and wooden accessories.

For experienced DIYers, a wet saw will make cutting tiles easy. Wet saws/electric cutters are used for right angles, curved or beveled edges and thicker tiles such as porcelain and natural stone. You can use it indoors but outside use is less messy.

The RYOBI 7 in. 4.8 Amp Tile Saw with Stand, exclusively available at Home Depot (opens in new tab) is a great candidate for more complex home improvements and comes with attractive features to help you achieve flawless results. 

The anti-slip rubber feet on the stand creates a stable surface, while the splash hood allows you to see exactly what you're doing, without the water getting in the way.

'This will depend on the type of tile you are working with,' says John Geraghty, tiling expert, MyJobQuote (opens in new tab) .

'For example, more delicate tiles such as porcelain will need a wet-saw tile cutter, whereas a ceramic tile is more versatile and various tools can be used.'

So if you've experienced broken tiles in the past, and wondering why they keep cracking, you could be using the wrong type of tool.

'There are many different types of tiles, and many different machines that will work on them.' says Ash.

'In my experience though, a wet table saw is an invaluable tool for cutting most, if not all types of tile, as these types of saws cut very straight and smooth. It can be used for ceramic, glass, porcelain, and natural stone tiles.

'You can rent a wet table saw for your specific project or choose to purchase one, but if you pick the latter option keep in mind that these saws come in multiple sizes, depending on the tile size you will be cutting.'

Ready to rent a tile saw? They're available at your local home improvement stores including Home Depot (opens in new tab) and Lowe's (opens in new tab) .

You can use a manual cutter, available from Amazon (opens in new tab) for straight cuts on porcelain and natural stone/slate tiles, then an electric cutter for more complex designs such as right angles and curves in mosaic tiles or a tile scribe for small, thin tiles.

Geraghty adds: 'A tile cutter is designed to carefully cut ceramic and porcelain to reduce the risk of shattering. This is a great tool to use as it is available in either manual, or powered variants to best suit your needs.'

Safety notice: With all tile cutting methods be sure to wear safety goggles (opens in new tab) and utility gloves (opens in new tab) , both of which you can buy on Amazon. Do not touch the blade and keep fingers away from it. Ensure any hazards are not present, do not wear loose clothing and keep children away also. Finally, go at your own pace.

'Yes, with the right equipment and correct measurements, cutting your own tiles can be incredibly simple,' assures Geraghty.

'Before starting, make sure you do have the correct equipment for your tile type, and do not assume a multi-functional tool will work for all, especially for more delicate tiles.'

'For example, if you're cutting such as porcelain, then you should only use a wet-saw cutter as anything else will be too tough. A multi-tool can replace the need for a tile nipper, used to make circular cuts in a ceramic tile, however they cannot replace a manual tile cutter.'

'Then, ensure you have the necessary protective wear, including goggles and gloves, as tile cutting will create a lot of dust.'

If you want to cut tiles without a wet saw or even a tile cutter you can use a glass cutter/scribe (opens in new tab) or carbide-tipped pencil, both of which you can buy on Amazon (opens in new tab) . Cutting tiles with a scribe can be done successfully on thinner glass tiles especially.

Geraghty says: 'For simple trimming, mark on top of the tile, where you would like to cut. Using a glass cutter, score the tile on the cut line. Then, place the tile on a solid surface with a wire clothes hanger under the score line. Press down and break the tile along the line and smooth the cut if necessary.'

'For a round cut then you can use an angle grinder [like this Black + Decker product on Amazon (opens in new tab) ], which is a handheld power tool that can be purchased from any good hardware store. Firstly, draw out the rounded shape or edge onto the front of the tile, ideally with a tile marker although a lead pencil should be perfectly sufficient too.'

'Then, secure the tile to a flat workbench, using a clamp, with the edge of the tile you intend to cut handing off the side of the bench. Finally, using a continuous rim blade on your grinder, slowly pull the angle grinder along your cut line. Do not rush this as this can cause jagged edges.'

As a stable place to sever tiles, this 2x4basics 90164MI Custom Work Bench is one of the cheapest we've found on Amazon (opens in new tab) , and comes with over 6,000 reviews. It's a great garage storage idea that's fab for keeping your finished tile-work tidy and organized.

Bonjour, Yasou, Hello — I'm Christina, ecommerce editor at Real Homes. Along with my super creative colleagues, I create content to help you create a chic home on a budget. I live in a two-bed maisonette with a garage and garden in Essex. Geographically, it's perfect; I've got the forest on my doorstep, and London is just 15 minutes by tube or car. I specialize in small kitchen appliances so that you can prepare food with ease at home. Prior to working for the Future plc family, I've worked on a number of consumer events including the Ideal Home Show, Grand Designs Live, and Good Homes Magazine. With a plethora of experience in digital marketing, editorial, and social media, I have an eye for what should be in your shopping basket.

By Amanda Lauren • Published 26 February 23

Yes, the sequin jumpsuit can stay

By Aida M. Toro • Published 26 February 23

Real Homes is part of Future plc, an international media group and leading digital publisher. Visit our corporate site. © Future US, Inc. Full 7th Floor, 130 West 42nd Street, New York, NY 10036.